Performing a routine oil change on your Mazda CX-5 is essential to keep the engine running smoothly and prolong the life of your vehicle. Regular oil changes help maintain optimal engine performance by reducing friction and preventing wear.

What You’ll Need

  • Engine oil (check your owner’s manual for the recommended type and amount)
  • Oil filter
  • Oil drain pan
  • Socket wrench set
  • Oil filter wrench
  • Funnel
  • Gloves and rags
  • Car jack and stands (if necessary)

Step-by-Step Oil Change Guide

  1. Warm up your engine for a few minutes to help the oil drain more easily, then park on a level surface and turn off the engine.
  2. Use a jack and stands if needed to access the oil drain plug underneath the vehicle safely.
  3. Place the oil drain pan under the drain plug and use the socket wrench to remove the plug. Let the old oil drain completely.
  4. Remove the old oil filter using the oil filter wrench. Be careful as it may still contain oil.
  5. Apply a small amount of new oil to the rubber seal of the new oil filter, then install it by hand until snug. Avoid overtightening.
  6. Replace the drain plug and tighten it securely with the socket wrench.
  7. Use a funnel to pour the correct amount of new engine oil into the oil filler opening on top of the engine.
  8. Start the engine and let it run for a few minutes, then check for leaks around the drain plug and filter.
  9. Turn off the engine, wait a few minutes, and check the oil level using the dipstick. Add more oil if necessary.
  10. Dispose of the used oil and filter properly by taking them to a recycling center or auto shop.

By following these simple steps, you can perform a routine oil change on your Mazda CX-5, helping ensure your vehicle stays in peak condition. Always consult your owner’s manual for specific recommendations and intervals.