Performing a DIY oil change on your Mazda CX-5 is a straightforward way to maintain your vehicle's performance and save on service costs. With basic tools and a little preparation, you can keep your engine running smoothly.

What You'll Need

  • New engine oil (check your owner's manual for the correct type and quantity)
  • Replacement oil filter
  • Oil filter wrench
  • Socket wrench set
  • Oil drain pan
  • Funnel
  • Gloves and rags
  • Jack and jack stands or ramps

Step-by-Step Guide to Changing Your Oil

Follow these steps to perform an oil change safely and efficiently:

  1. Warm up your engine for a few minutes to help the oil drain out smoothly, then turn off the car and secure it on a flat surface using jack stands or ramps.
  2. Place the oil drain pan underneath the oil drain plug located at the bottom of the oil pan.
  3. Use the socket wrench to carefully remove the drain plug and let the old oil drain completely.
  4. Once drained, replace and tighten the drain plug securely.
  5. Remove the old oil filter using the oil filter wrench and prepare the new filter by applying a bit of new oil to the rubber seal.
  6. Install the new oil filter by hand, ensuring it is snug but not over-tightened.
  7. Open the hood and pour the correct amount and type of new oil into the engine using a funnel.
  8. Start the engine and let it run for a few minutes, then check for leaks and verify the oil level with the dipstick, adding more if necessary.
  9. Dispose of the used oil and filter properly at a recycling center.

By regularly changing your Mazda CX-5's oil, you help prolong engine life and maintain optimal performance. Always consult your owner’s manual for the recommended oil change intervals and specifications.